Caliber Rdab IO Instrukcja Obsługi Pobierz pdf (Strona 13)

 13 

cartridge discharging before it is properly chambered. If this happens, the cartridge case

may rupture and its fragments fly out of the ejection port of the pistol with sufficient

force to cause serious injury. Always wear shooting glasses!

TO MINIMIZE MALFUNCTIONS (JAMS)

1. If it appears that the type of ammunition being used caused the jam, try another

brand, type, or lot number. Remember  use only factory ammunition of the

correct caliber.

2. If changing ammunition does not at once eliminate malfunctions, then the

following steps should be taken:

Thoroughly clean the pistol, paying particular attention to the removal of accumulated

grease and dirt. Use a bristle brush and solvent to remove grease and fouling from the

breech-face, extractor, chamber, and feed ramp area immediately behind the chamber.

Check to be sure that the magazine spring firmly returns the magazine follower to the top

of the magazine.

Check the magazine lips to be certain that they are free of nicks and burrs and that they

are not deformed or cracked.

Remove excess oil and solvent from all cleaned components, load the magazine and try

the pistol again. Make sure you are following the correct loading and firing sequence as

described in this manual.

If none of the above steps is effective, try a different magazine. If a different magazine

does not function correctly, return the pistol and magazine to the I.O. INC Product

Service Department. 1-866-882-1479.

Alterations to the pistol or use of improper magazines and accessories may

cause malfunctions.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Brak uwag

Caliber Rdab IO Instrukcja Obsługi Strona 13