Caliber MCD795 Instrukcja Naprawy Pobierz pdf (Strona 13)

•

other colors may not appear with a built-in GPS. Should any of

these appear, this means a faulty operation of your device.

3.3.3 GPS data quality indicator

In the top left corner there is a satellite dish to show the quality of the GPS position.

Different colors represent different signal quality:

•

black with a red cross means there is no connection with this GPS device.

This should never be the case if your device has a built-in GPS.

•

red means the GPS is connected but no GPS position is available,

•

yellow means 2D reception. A GPS position has been acquired, This GPS

device is ready for navigation, but the GPS is using enough satellites for

calculating the horizontal position only. Elevation data is not provided, and the

position error may be significant.

•

green means 3D reception. The GPS receiver has enough satellites to

calculate altitude. Position is generally correct (yet it can still be inaccurate due to

different environmental factors). The GPS device is ready for navigation.

3.3.4 Time synchronization

In the top right corner of the screen you have another button that leads to a new

screen where you can synchronize the clock of your Device to the very accurate time

provided by the connected GPS.

Turn on the Auto Correction switch to let this GPS device frequently check and

correct the Device time with the GPS time.

Below that button you will see the current values of the GPS and the Device clocks.

You can check here whether any correction is needed. Tap the

button to

manually synchronize the time.

Below the Device time you have hour and minute controls to manually correct the

time with or without a valid GPS time. It also gives you the chance to correct the time

after synchronization if your Device does not support time zones or daylight saving

time.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 72 73

Brak uwag

Caliber MCD795 Instrukcja Naprawy Strona 13